Changes from 2024-07-26

printer.cfg

@@ -27,6 +27,11 @@ canbus_uuid: 970febd72165
 [include ebb36.cfg]
 [include klicky-probe.cfg]
 [include klicky-quad-gantry-level.cfg]
+[include fluidd.cfg]
+[include stealthburner_leds.cfg]
+[include martyn_macros.cfg]
+
+
 
 [printer]
 kinematics: corexy
@@ -111,7 +116,7 @@ endstop_pin: PG10
 ##  (+) value = endstop above Z0, (-) value = endstop below
 ##  Increasing position_endstop brings nozzle closer to the bed
 ##  After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
-position_endstop: -0.5
+#position_endstop: -0.5
 position_max: 310
 position_min: -5
 homing_speed: 8
@@ -381,18 +386,10 @@ gcode:
     #G0 X150 Y150 Z30 F3600
     
     ##  Uncomment for 350mm build
-    #G0 X175 Y175 Z30 F3600
+    G0 X175 Y175 Z30 F3600
     #--------------------------------------------------------------------
     RESTORE_GCODE_STATE NAME=STATE_G32
 
-   
-#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
-[gcode_macro PRINT_START]
-gcode:
-    G32                            ; home all axes
-    G90                            ; absolute positioning
-    G1 Z20 F3000                   ; move nozzle away from bed
-   
 
 #   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
 [gcode_macro PRINT_END]
@@ -418,3 +415,9 @@ gcode:
     
     BED_MESH_CLEAR
     RESTORE_GCODE_STATE NAME=STATE_PRINT_END
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [stepper_z]
+#*# position_endstop = -0.060