martyn/voronklipperconfig
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

initial repo setup, backdated

Browse source
This commit is contained in:
Martyn 2024-07-26 16:08:59 +01:00
parent 588e95ffb8
commit 2dd6e15a99
2 changed files with 360 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

273
martyn_macros.cfg Normal file
View file

@ -0,0 +1,273 @@
[gcode_macro PRINT_START]
gcode:
{% set BED_TEMP = params.BED|default(60)|float %}
{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
{% set STANDBY_TEMP = params.STANDBY|default(190)|float %}
{% set CHAMBER_TEMP = params.CHAMBER|default(55)|float %}
G90 ; ensure absolute positioning
STATUS_HOMING
G92 E0 ; Reset Extruder
SMARTHOME ; Home all axes
STATUS_HEATING
;TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={STANDBY_TEMP} ; Start heating up the nozzle most of the way
M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached
M4 P120000 ; Wait 2 minutes
;TEMPERATURE_WAIT SENSOR="temperature_sensor chamber_temp" MINIMUM={CHAMBER_TEMP} ; Wait for chamber temp
M140 S0 ; turn off power to the bed, interference with probe?
G28 Z ; Heatsoaked, validate that z
QUAD_GANTRY_LEVEL
STATUS_MESHING
BED_MESH_CALIBRATE
M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached
M109 S{EXTRUDER_TEMP} ; Finish heating the nozzle
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
SKEW_PROFILE LOAD=calilantern_skew_profile
STATUS_PRINTING
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice
[gcode_macro PRINT_END]
gcode:
# safe anti-stringing move coords
{% set th = printer.toolhead %}
{% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
{% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
{% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
SET_SKEW CLEAR=1
SAVE_GCODE_STATE NAME=STATE_PRINT_END
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-5.0 F1800 ; retract filament
TURN_OFF_HEATERS
G90 ; absolute positioning
G0 X{x_safe} Y{y_safe} Z{z_safe} F20000 ; move nozzle to remove stringing
G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600 ; park nozzle at rear
M107 ; turn off fan
RESTORE_GCODE_STATE NAME=STATE_PRINT_END
[gcode_macro G32]
gcode:
SAVE_GCODE_STATE NAME=STATE_G32
G90
G28
QUAD_GANTRY_LEVEL
G28
G0 X175 Y175 Z30 F3600
#--------------------------------------------------------------------
RESTORE_GCODE_STATE NAME=STATE_G32
[gcode_macro POWER_ON_SETUP]
gcode:
STATUS_HOMING
SMARTHOME
CLEAN_NOZZLE
G1 X298 Y330
G28 Z ; Hopefully the nozzle is empty now
STATUS_LEVELING
[gcode_macro ABS_PREHEAT]
gcode:
M190 S115
[gcode_macro SMARTHOME]
gcode:
{% if printer.toolhead.homed_axes == "xyz" %}
M118 Printer is already homed
{% else %}
M118 Printer needs homing...
G28
{% endif %}
[gcode_macro M355]
gcode:
{% set S = params.S|default(1)|float %}
#default_parameter_S=1
SET_PIN PIN=caselight VALUE={S}
[gcode_macro CLEAN_NOZZLE]
variable_start_x: 298
variable_start_y: 349
variable_start_z: 1
variable_wipe_dist: -39
variable_wipe_qty: 5
variable_wipe_spd: 200
variable_raise_distance: 30
gcode:
{% if "xyz" not in printer.toolhead.homed_axes %}
G28
{% endif %}
G90 ; absolute positioning
## Move nozzle to start position
G1 X{start_x} Y{start_y} F6000
G1 Z{start_z} F1500
## Wipe nozzle
{% for wipes in range(1, (wipe_qty + 1)) %}
G1 X{start_x + wipe_dist} F{wipe_spd * 60}
G1 X{start_x} F{wipe_spd * 60}
{% endfor %}
## Raise nozzle
G1 Z{raise_distance}
[gcode_macro M600]
########### Gcode ############
gcode:
{% set X = params.X|default(175)|int %}
{% set Y = params.Y|default(0)|int %}
{% set Z = params.Z|default(10)|int %}
{% set E = params.E|default(-20)|int %}
{% set tool = params.tool|default(0)|int %}
PAUSE
G91
G1 E-5 F4000
G1 Z{Z}
G90
G1 X{X} Y{Y} F3000 ;park position
G0 E10 F500 ;extrude filament to get better blob on end
G0 E{E} F600 ;retract additional filament to move out of melt zone
G92 E0
[delayed_gcode bed_mesh_init]
initial_duration: .01
gcode:
BED_MESH_PROFILE LOAD=default
[gcode_macro TEST_SPEED]
# from ellis
# Home, get position, throw around toolhead, home again.
# If MCU stepper positions (first line in GET_POSITION) are greater than a full step different (your number of microsteps), then skipping occured.
# We only measure to a full step to accomodate for endstop variance.
# Example: TEST_SPEED SPEED=300 ACCEL=5000 ITERATIONS=10
description: Test for max speed and acceleration parameters for the printer. Procedure: Home -> ReadPositionFromMCU -> MovesToolhead@Vel&Accel -> Home -> ReadPositionfromMCU
gcode:
# Speed
{% set speed = params.SPEED|default(printer.configfile.settings.printer.max_velocity)|int %}
# Iterations
{% set iterations = params.ITERATIONS|default(5)|int %}
# Acceleration
{% set accel = params.ACCEL|default(printer.configfile.settings.printer.max_accel)|int %}
# Minimum Cruise Ratio
{% set min_cruise_ratio = params.MIN_CRUISE_RATIO|default(0.5)|float %}
# Bounding inset for large pattern (helps prevent slamming the toolhead into the sides after small skips, and helps to account for machines with imperfectly set dimensions)
{% set bound = params.BOUND|default(20)|int %}
# Size for small pattern box
{% set smallpatternsize = SMALLPATTERNSIZE|default(20)|int %}
# Large pattern
# Max positions, inset by BOUND
{% set x_min = printer.toolhead.axis_minimum.x + bound %}
{% set x_max = printer.toolhead.axis_maximum.x - bound %}
{% set y_min = printer.toolhead.axis_minimum.y + bound %}
{% set y_max = printer.toolhead.axis_maximum.y - bound %}
# Small pattern at center
# Find X/Y center point
{% set x_center = (printer.toolhead.axis_minimum.x|float + printer.toolhead.axis_maximum.x|float ) / 2 %}
{% set y_center = (printer.toolhead.axis_minimum.y|float + printer.toolhead.axis_maximum.y|float ) / 2 %}
# Set small pattern box around center point
{% set x_center_min = x_center - (smallpatternsize/2) %}
{% set x_center_max = x_center + (smallpatternsize/2) %}
{% set y_center_min = y_center - (smallpatternsize/2) %}
{% set y_center_max = y_center + (smallpatternsize/2) %}
# Save current gcode state (absolute/relative, etc)
SAVE_GCODE_STATE NAME=TEST_SPEED
# Output parameters to g-code terminal
{ action_respond_info("TEST_SPEED: starting %d iterations at speed %d, accel %d" % (iterations, speed, accel)) }
# Home and get position for comparison later:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28
# QGL if not already QGLd (only if QGL section exists in config)
{% if printer.configfile.settings.quad_gantry_level %}
{% if printer.quad_gantry_level.applied == False %}
QUAD_GANTRY_LEVEL
G28 Z
{% endif %}
{% endif %}
# Move 50mm away from max position and home again (to help with hall effect endstop accuracy - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/24)
G90
G1 X{printer.toolhead.axis_maximum.x-50} Y{printer.toolhead.axis_maximum.y-50} F{30*60}
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 X Y
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Go to starting position
G0 X{x_min} Y{y_min} Z{bound + 10} F{speed*60}
# Set new limits
{% if printer.configfile.settings.printer.minimum_cruise_ratio is defined %}
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} MINIMUM_CRUISE_RATIO={min_cruise_ratio}
{% else %}
SET_VELOCITY_LIMIT VELOCITY={speed} ACCEL={accel} ACCEL_TO_DECEL={accel / 2}
{% endif %}
{% for i in range(iterations) %}
# Large pattern diagonals
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Large pattern box
G0 X{x_min} Y{y_min} F{speed*60}
G0 X{x_min} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_max} F{speed*60}
G0 X{x_max} Y{y_min} F{speed*60}
# Small pattern diagonals
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
# Small pattern box
G0 X{x_center_min} Y{y_center_min} F{speed*60}
G0 X{x_center_min} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_max} F{speed*60}
G0 X{x_center_max} Y{y_center_min} F{speed*60}
{% endfor %}
# Restore max speed/accel/accel_to_decel to their configured values
{% if printer.configfile.settings.printer.minimum_cruise_ratio is defined %}
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} MINIMUM_CRUISE_RATIO={printer.configfile.settings.printer.minimum_cruise_ratio}
{% else %}
SET_VELOCITY_LIMIT VELOCITY={printer.configfile.settings.printer.max_velocity} ACCEL={printer.configfile.settings.printer.max_accel} ACCEL_TO_DECEL={printer.configfile.settings.printer.max_accel_to_decel}
{% endif %}
# Re-home and get position again for comparison:
M400 # Finish moves - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/66
G28 # This is a full G28 to fix an issue with CoreXZ - https://github.com/AndrewEllis93/Print-Tuning-Guide/issues/12
# Go to XY home positions (in case your homing override leaves it elsewhere)
G90
G0 X{printer.toolhead.axis_maximum.x-1} Y{printer.toolhead.axis_maximum.y-1} F{30*60}
G4 P1000
GET_POSITION
# Restore previous gcode state (absolute/relative, etc)
RESTORE_GCODE_STATE NAME=TEST_SPEED

87
moonraker.conf Normal file
View file

@ -0,0 +1,87 @@
[server]
host: 0.0.0.0
port: 7125
klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
[authorization]
trusted_clients:
172.20.0.0/16
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
cors_domains:
*.lan
*.local
*://localhost
*://localhost:*
*://my.mainsail.xyz
*://app.fluidd.xyz
[octoprint_compat]
[history]
[file_manager]
enable_object_processing: True
[update_manager]
channel: dev
refresh_interval: 168
[update_manager fluidd-config]
type: git_repo
primary_branch: master
path: ~/fluidd-config
origin: https://github.com/fluidd-core/fluidd-config.git
managed_services: klipper
[update_manager fluidd]
type: web
channel: stable
repo: fluidd-core/fluidd
path: ~/fluidd
# Crowsnest update_manager entry
[update_manager crowsnest]
type: git_repo
path: ~/crowsnest
origin: https://github.com/mainsail-crew/crowsnest.git
managed_services: crowsnest
install_script: tools/pkglist.sh
[update_manager z_calibration]
type: git_repo
path: /home/pi/klipper_z_calibration
origin: https://github.com/protoloft/klipper_z_calibration.git
managed_services: klipper
## Klippain Shake&Tune automatic update management
[update_manager Klippain-ShakeTune]
type: git_repo
origin: https://github.com/Frix-x/klippain-shaketune.git
path: ~/klippain_shaketune
virtualenv: ~/klippy-env
requirements: requirements.txt
system_dependencies: system-dependencies.json
primary_branch: main
managed_services: klipper
[update_manager cartographer]
type: git_repo
path: ~/cartographer-klipper
channel: dev
origin: https://github.com/Cartographer3D/cartographer-klipper.git
virtualenv: ~/klippy-env
requirements: requirements.txt
install_script: install.sh
is_system_service: False
managed_services: klipper
info_tags:
desc=Cartographer Probe