martyn/voronklipperconfig
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
voronklipperconfig/printer.cfg

504 lines
14 KiB
INI
Raw Blame History

[include mmu/base/*.cfg]
[include mmu/optional/client_macros.cfg]
[include mmu/optional/mmu_menu.cfg]
# This file contains common pin mappings for the BigTreeTech Octopus V1.
# To use this config, the firmware should be compiled for the STM32F446 with a "32KiB bootloader"
# Enable "extra low-level configuration options" and select the "12MHz crystal" as clock reference
# after running "make", copy the generated "klipper/out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the OctoPus with that SD card.
# See docs/Config_Reference.md for a description of parameters.
## Voron Design VORON2 250/300/350mm BigTreeTech OctoPus V1 TMC2209 UART config
## *** THINGS TO CHANGE/CHECK: ***
## MCU paths [mcu] section
## Thermistor types [extruder] and [heater_bed] sections - See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types
## Z Endstop Switch location [safe_z_home] section
## Homing end position [gcode_macro G32] section
## Z Endstop Switch offset for Z0 [stepper_z] section
## Probe points [quad_gantry_level] section
## Min & Max gantry corner postions [quad_gantry_level] section
## PID tune [extruder] and [heater_bed] sections
## Probe pin [probe] section
## Fine tune E steps [extruder] section
[mcu]
# katapulted klipper on can
canbus_uuid: 970febd72165
# katapulted klipper on usb
#serial: /dev/serial/by-id/usb-Klipper_stm32f446xx_210044000150335331383520-if00
[include ebb36.cfg]
#[include klicky-probe.cfg]
#[include klicky-quad-gantry-level.cfg]
[include fluidd.cfg]
[include stealthburner_leds.cfg]
[include bedfans.cfg]
#[include eddy_macros.cfg]
[include martyn_macros.cfg]
[include shaketune.cfg]
[printer]
kinematics: corexy
max_velocity: 700
max_accel: 3300 #Max 4000
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
max_z_accel: 350
square_corner_velocity: 5.0
#####################################################################
# X/Y Stepper Settings
#####################################################################
## B Stepper - Left
## Connected to MOTOR_0
## Endstop connected to DIAG_0
[stepper_x]
step_pin: PF13
dir_pin: PF12
enable_pin: !PF14
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:400 #set to 200 for 1.8 degree stepper
endstop_pin: PG6
position_min: 0
position_endstop: 345
position_max: 345
homing_speed: 50 #Max 100
homing_retract_dist: 5
homing_positive_dir: true
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_x]
uart_pin: PC4
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 0
## A Stepper - Right
## Connected to MOTOR_1
## Endstop connected to DIAG_1
[stepper_y]
step_pin: PG0
dir_pin: PG1
enable_pin: !PF15
rotation_distance: 40
microsteps: 32
full_steps_per_rotation:400 #set to 200 for 1.8 degree stepper
endstop_pin: PG9
position_min: 0
position_endstop: 355
position_max: 355
homing_speed: 50 #Max 100
homing_retract_dist: 5
homing_positive_dir: true
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_y]
uart_pin: PD11
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 0
#####################################################################
# Z Stepper Settings
#####################################################################
## Z0 Stepper - Front Left
## Connected to MOTOR_2
## Endstop connected to DIAG_2
[stepper_z]
step_pin: PF11
dir_pin: PG3
enable_pin: !PG5
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
endstop_pin: probe:z_virtual_endstop
#endstop_pin: !ebb36:PB7
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
#position_endstop: -0.2
position_max: 310
position_min: -5
homing_speed: 15
#second_homing_speed: 3
#homing_retract_dist: 3
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z]
uart_pin: PC6
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 999999
## Z1 Stepper - Rear Left
## Connected to MOTOR_3
[stepper_z1]
step_pin: PG4
dir_pin: !PC1
enable_pin: !PA0
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z1]
uart_pin: PC7
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 999999
## Z2 Stepper - Rear Right
## Connected to MOTOR_4
[stepper_z2]
step_pin: PF9
dir_pin: PF10
enable_pin: !PG2
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z2]
uart_pin: PF2
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 999999
## Z3 Stepper - Front Right
## Connected to MOTOR_5
[stepper_z3]
step_pin: PC13
dir_pin: !PF0
enable_pin: !PF1
rotation_distance: 40
gear_ratio: 80:16
microsteps: 32
## Make sure to update below for your relevant driver (2208 or 2209)
[tmc2209 stepper_z3]
uart_pin: PE4
interpolate: false
run_current: 0.8
sense_resistor: 0.110
stealthchop_threshold: 999999
#####################################################################
# Bed Heater
#####################################################################
## SSR Pin - HE1
## Thermistor - TB
[heater_bed]
heater_pin: PA1
## Validate the following thermistor type to make sure it is correct
## Keenovo branded bed heaters should use Generic 3950
## LDO branded bed heaters will have the sensor type labelled on the heater
## Check what thermistor type you have. See https://www.klipper3d.org/Config_Reference.html#common-thermistors for common thermistor types.
## Use "Generic 3950" for Keenovo heaters
sensor_type: ATC Semitec 104NT-4-R025H42G
sensor_pin: PF3
## Adjust Max Power so your heater doesn't warp your bed. Rule of thumb is 0.4 watts / cm^2 .
max_power: 0.6
min_temp: 0
max_temp: 120
control: pid
pid_kp: 58.437
pid_ki: 2.347
pid_kd: 363.769
#####################################################################
# Fan Control
#####################################################################
## Controller fan - FAN2
[temperature_fan controller_fan]
pin: PD12
sensor_type: temperature_host
control: watermark
max_delta: 3
min_temp: 0
max_temp: 100
target_temp: 55
max_speed: 0.5
## Exhaust fan - FAN3
#[heater_fan exhaust_fan]
#pin: PD13
#max_power: 1.0
#shutdown_speed: 0.0
#kick_start_time: 5.0
#heater: heater_bed
#heater_temp: 60
#fan_speed: 1.0
#####################################################################
# LED Control
#####################################################################
[output_pin caselight]
## Chamber Lighting - CNC_FAN5
pin: PD15
pwm:true
shutdown_value: 0
value:1
cycle_time: 0.01
#####################################################################
# Additional Sensors
#####################################################################
[thermistor CMFB103F3950FANT]
temperature1: 0.0
resistance1: 32116.0
temperature2: 40.0
resistance2: 5309.0
temperature3: 80.0
resistance3: 1228.0
[temperature_sensor chamber_temp]
# Chamber Temperature - T1
sensor_type: EPCOS 100K B57560G104F # total guess really, but sure.
sensor_pin: PF5
min_temp: 0
max_temp: 100
gcode_id: chamber_th
#####################################################################
# Homing and Gantry Adjustment Routines
#####################################################################
[idle_timeout]
timeout: 1800
# Need to work out how eddy interferes with magic home
#[safe_z_home]
#home_xy_position: 175,175
#speed:100
#z_hop:10
#z_hop_speed:10
[homing_override]
axes: z
gcode:
SET_KINEMATIC_POSITION Z=0
G1 Z10 F3000
{% if not 'X' in printer.toolhead.homed_axes %}
G28 X0
{% endif %}
{% if not 'Y' in printer.toolhead.homed_axes %}
G28 Y0
{% endif %}
G1 X150 Y150 F3000
G28 Z0
G1 Z10 F3000
## Use QUAD_GANTRY_LEVEL to level a gantry.
## Min & Max gantry corners - measure from nozzle at MIN (0,0) and
## MAX (250, 250), (300,300), or (350,350) depending on your printer size
## to respective belt positions
[quad_gantry_level]
gantry_corners:
-60,-10
410,420
# Probe points
points:
50,25
50,275
300,275
300,25
speed: 100
horizontal_move_z: 10
retries: 5
retry_tolerance: 0.04
max_adjust: 10
########################################
# EXP1 / EXP2 (display) pins
########################################
[board_pins]
aliases:
# EXP1 header
EXP1_1=PE8, EXP1_2=PE7,
EXP1_3=PE9, EXP1_4=PE10,
EXP1_5=PE12, EXP1_6=PE13, # Slot in the socket on this side
EXP1_7=PE14, EXP1_8=PE15,
EXP1_9=<GND>, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PA6, EXP2_2=PA5,
EXP2_3=PB1, EXP2_4=PA4,
EXP2_5=PB2, EXP2_6=PA7, # Slot in the socket on this side
EXP2_7=PC15, EXP2_8=<RST>,
EXP2_9=<GND>, EXP2_10=<5V>
#####################################################################
# Displays
#####################################################################
[display]
# mini12864 LCD Display
lcd_type: uc1701
cs_pin: EXP1_3
a0_pin: EXP1_4
rst_pin: EXP1_5
encoder_pins: ^EXP2_5, ^EXP2_3
click_pin: ^!EXP1_2
contrast: 63
spi_software_miso_pin: EXP2_1
spi_software_mosi_pin: EXP2_6
spi_software_sclk_pin: EXP2_2
[neopixel btt_mini12864]
# To control Neopixel RGB in mini12864 display
pin: EXP1_6
chain_count: 3
initial_RED: 0.6
initial_GREEN: 0.0
initial_BLUE: 0.0
color_order: RGB
## Set RGB values on boot up for each Neopixel.
## Index 1 = display, Index 2 and 3 = Knob
[delayed_gcode setdisplayneopixel]
initial_duration: 1
gcode:
SET_LED LED=btt_mini12864 RED=1 GREEN=1 BLUE=1 INDEX=1 TRANSMIT=0
SET_LED LED=btt_mini12864 RED=0.6 GREEN=0 BLUE=1 INDEX=2 TRANSMIT=0
SET_LED LED=btt_mini12864 RED=0.6 GREEN=0 BLUE=1 INDEX=3
#--------------------------------------------------------------------
[temperature_sensor pi]
sensor_type: temperature_host
[temperature_sensor mcu]
sensor_type: temperature_mcu
[skew_correction]
[exclude_object]
#####################################################################
# Macros
#####################################################################
[probe] ## Other parameters in config.cfg
pin: !ebb36:PB7
x_offset: 0.0
y_offset: 0.0
z_offset: 0.0
speed: 15.0 # Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
samples: 2
sample_retract_dist: 3.0
samples_tolerance_retries: 1
lift_speed: 10
activate_gcode:
G4 P200 ;Wait 200ms
SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT=0.4
deactivate_gcode:
{% set run_current = printer.configfile.config['tmc2209 stepper_z'].run_current | float %}
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={run_current}
[bed_mesh]
speed: 800
horizontal_move_z: 3
mesh_min: 0, 0
mesh_max: 310, 310
zero_reference_position: 175, 175
# #mesh_pps: 9, 9
algorithm: bicubic
bicubic_tension: 0.2
probe_count: 7,7
[input_shaper]
shaper_freq_x: 91.4
shaper_freq_y: 70.0
shaper_type: 3hump_ei
[mcu eddy]
canbus_uuid: 01dd4779f312
#[probe_eddy_current btt_eddy]
#sensor_type: ldc1612
#z_offset: 2.01
#i2c_mcu: eddy
#i2c_bus: i2c0f
#x_offset: 0
#y_offset: 21.42
#[temperature_probe btt_eddy]
#sensor_type: Generic 3950
#sensor_pin: eddy:gpio26
#horizontal_move_z: 2
[gcode_macro PROBE_EDDY_CURRENT_CALIBRATE_AUTO]
gcode:
BED_MESH_CLEAR
G28 X Y
G90 # Abs positioning
G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } F6000
{% if 'z' not in printer.toolhead.homed_axes %}
SET_KINEMATIC_POSITION Z={ printer.toolhead.axis_maximum.z-1 } # Allows the user to work it down until it touches.
{% endif %}
PROBE_EDDY_CURRENT_CALIBRATE {rawparams}
[force_move]
enable_force_move: True
#*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*#
#*# [bed_mesh default]
#*# version = 1
#*# points =
#*# -0.013814, 0.002245, 0.005321, 0.037976, 0.048046, 0.060540, 0.070946, 0.056286, 0.060975
#*# -0.001514, -0.003904, 0.018992, 0.015656, 0.024350, 0.037976, 0.057306, 0.054291, 0.038143
#*# -0.032466, -0.007290, 0.009769, 0.005321, 0.029468, 0.034263, 0.062378, 0.049342, 0.044221
#*# -0.041181, -0.025479, -0.007925, -0.000403, 0.004208, 0.031030, 0.042659, 0.031605, 0.029899
#*# -0.059714, -0.035092, -0.003052, -0.006128, -0.000229, 0.008656, 0.032592, 0.019419, 0.030166
#*# -0.062837, -0.016463, -0.010738, 0.004044, -0.000826, 0.024083, 0.047180, 0.033722, 0.040834
#*# -0.040349, -0.016038, 0.003360, 0.008820, 0.014120, 0.031030, 0.053163, 0.038785, 0.043882
#*# -0.027854, -0.012273, 0.009507, 0.015658, 0.020269, 0.042397, 0.052996, 0.039967, 0.049342
#*# -0.021443, -0.001939, 0.002669, 0.013694, 0.017621, 0.031032, 0.048044, 0.044225, 0.041100
#*# x_count = 9
#*# y_count = 9
#*# mesh_x_pps = 9
#*# mesh_y_pps = 9
#*# algo = bicubic
#*# tension = 0.2
#*# min_x = 35.0
#*# max_x = 309.96
#*# min_y = 35.0
#*# max_y = 309.96000000000004
#*#
#*# [skew_correction calilantern_skew_profile]
#*# xy_skew = 0.007318697823262824
#*# xz_skew = 0.0004313347372552723
#*# yz_skew = -0.0005939714989857676
Reference in a new issue View git blame Copy permalink