martyn/voronklipperconfig
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Automatic commit of config from 2025-04-23

Browse source
This commit is contained in:
Martyn 2025-04-23 11:07:21 +01:00
parent fefa2794a7
commit c3a80b0846
3 changed files with 117 additions and 64 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

16
martyn_macros.cfg
View file

@ -3,31 +3,27 @@ gcode:
{% set BED_TEMP = params.BED|default(60)|float %} {% set BED_TEMP = params.BED|default(60)|float %}
{% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %} {% set EXTRUDER_TEMP = params.EXTRUDER|default(190)|float %}
{% set STANDBY_TEMP = params.STANDBY|default(190)|float %} {% set STANDBY_TEMP = params.STANDBY|default(190)|float %}
{% set CHAMBER_TEMP = params.CHAMBER|default(55)|float %} {% set CHAMBER_TEMP = params.CHAMBER|default(45)|float %}
G90 ; ensure absolute positioning G90 ; ensure absolute positioning
STATUS_HOMING STATUS_HOMING
G92 E0 ; Reset Extruder G92 E0 ; Reset Extruder
SMARTHOME ; Home all axes BED_MESH_CLEAR
G28 ; Home all axes
;QUAD_GANTRY_LEVEL
STATUS_HEATING STATUS_HEATING
;TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={STANDBY_TEMP} ; Start heating up the nozzle most of the way ;TEMPERATURE_WAIT SENSOR=heater_bed MINIMUM={STANDBY_TEMP} ; Start heating up the nozzle most of the way
M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached
M4 P120000 ; Wait 2 minutes M4 P120000 ; Wait 2 minutes
;TEMPERATURE_WAIT SENSOR="temperature_sensor chamber_temp" MINIMUM={CHAMBER_TEMP} ; Wait for chamber temp TEMPERATURE_WAIT SENSOR="temperature_sensor chamber_temp" MINIMUM={CHAMBER_TEMP} ; Wait for chamber temp
M140 S0 ; turn off power to the bed, interference with probe? M140 S0 ; turn off power to the bed, interference with probe?
SET_GCODE_OFFSET Z=0.0 ; Reset the G-Code Z offset so we can set it manually later. we don't care if move=1|0 because we're about to home anyway.
G28 Z0 ; Heatsoaked, validate that z G28 Z0 ; Heatsoaked, validate that z
G90 ; ensure absolute positioning (how would it be something else?!
G1 Z10 F3000
QUAD_GANTRY_LEVEL
STATUS_MESHING STATUS_MESHING
BED_MESH_CALIBRATE ;Well, this is fine and dandy... BED_MESH_CALIBRATE ;Well, this is fine and dandy...
G28 Z0 ; Leveled, validate that z!
M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached M190 S{BED_TEMP} ; Start heating the bed, wait until target temperature reached
M109 S{EXTRUDER_TEMP} ; Finish heating the nozzle M109 S{EXTRUDER_TEMP} ; Finish heating the nozzle
CLEAN_NOZZLE CLEAN_NOZZLE
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
#SET_GCODE_OFFSET Z_ADJUST=-0.45 MOVE=1 ; This is how we will permanently save the Z offset without having to care about type of probe.
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
@ -37,7 +33,7 @@ gcode:
G1 E-1 ; Retract before cleaning, or we will still have stringing G1 E-1 ; Retract before cleaning, or we will still have stringing
CLEAN_NOZZLE ; doing this again is probably gonna make it work! CLEAN_NOZZLE ; doing this again is probably gonna make it work!
SKEW_PROFILE LOAD=calilantern_skew_profile SKEW_PROFILE LOAD=calilantern_skew_profile
G1 E-0.1 ; "UnRetract" (I forgot we were in absolutes!) G1 E0 ; "UnRetract" (I forgot we were in absolutes!)
STATUS_PRINTING STATUS_PRINTING
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice # Use PRINT_END for the slicer ending script - please customise for your slicer of choice

4
mmu/mmu_vars.cfg
View file

@ -1,5 +1,5 @@
[Variables] [Variables]
mmu__revision = 2392 mmu__revision = 2542
mmu_calibration_bowden_home = 'encoder' mmu_calibration_bowden_home = 'encoder'
mmu_calibration_bowden_lengths = [1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1] mmu_calibration_bowden_lengths = [1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1]
mmu_calibration_clog_length = 17.4 mmu_calibration_clog_length = 17.4
@ -24,7 +24,7 @@ mmu_state_gate_temperature = [200, 200, 200, 200, 200, 200, 200, 200]
mmu_state_last_tool = 1 mmu_state_last_tool = 1
mmu_state_tool_selected = -2 mmu_state_tool_selected = -2
mmu_state_tool_to_gate_map = [0, 1, 2, 3, 4, 5, 6, 7] mmu_state_tool_to_gate_map = [0, 1, 2, 3, 4, 5, 6, 7]
mmu_statistics_counters = {'servo_down': {'count': 812, 'limit': 5000, 'warning': 'Inspect servo arm for wear/damage', 'pause': False}, 'mmu_restarts': {'count': 129, 'limit': -1, 'warning': ''}, 'cutter_blade': {'count': 48, 'limit': 3000, 'warning': 'Inspect/replace filament cutting blade', 'pause': False}} mmu_statistics_counters = {'servo_down': {'count': 812, 'limit': 5000, 'warning': 'Inspect servo arm for wear/damage', 'pause': False}, 'mmu_restarts': {'count': 159, 'limit': -1, 'warning': ''}, 'cutter_blade': {'count': 48, 'limit': 3000, 'warning': 'Inspect/replace filament cutting blade', 'pause': False}}
mmu_statistics_gate_0 = {'pauses': 12, 'loads': 28, 'load_distance': 38354.336, 'load_delta': 6896.202, 'unloads': 43, 'unload_distance': 31567.3, 'unload_delta': 1877.741, 'load_failures': 7, 'unload_failures': 16, 'quality': 0.9546537865318246} mmu_statistics_gate_0 = {'pauses': 12, 'loads': 28, 'load_distance': 38354.336, 'load_delta': 6896.202, 'unloads': 43, 'unload_distance': 31567.3, 'unload_delta': 1877.741, 'load_failures': 7, 'unload_failures': 16, 'quality': 0.9546537865318246}
mmu_statistics_gate_1 = {'pauses': 2, 'loads': 22, 'load_distance': 28896.615, 'load_delta': 90.861, 'unloads': 25, 'unload_distance': 27502.0, 'unload_delta': 1483.93, 'load_failures': 1, 'unload_failures': 5, 'quality': 0.8375118313601163} mmu_statistics_gate_1 = {'pauses': 2, 'loads': 22, 'load_distance': 28896.615, 'load_delta': 90.861, 'unloads': 25, 'unload_distance': 27502.0, 'unload_delta': 1483.93, 'load_failures': 1, 'unload_failures': 5, 'quality': 0.8375118313601163}
mmu_statistics_gate_2 = {'pauses': 0, 'loads': 0, 'load_distance': 0.0, 'load_delta': 0.0, 'unloads': 0, 'unload_distance': 0.0, 'unload_delta': 0.0, 'load_failures': 0, 'unload_failures': 0, 'quality': -1.0} mmu_statistics_gate_2 = {'pauses': 0, 'loads': 0, 'load_distance': 0.0, 'load_delta': 0.0, 'unloads': 0, 'unload_distance': 0.0, 'unload_delta': 0.0, 'load_failures': 0, 'unload_failures': 0, 'quality': -1.0}

161
printer.cfg
View file

@ -119,13 +119,13 @@ enable_pin: !PG5
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
microsteps: 32 microsteps: 32
endstop_pin: probe:z_virtual_endstop #endstop_pin: probe:z_virtual_endstop
#endstop_pin: !ebb36:PB7 endstop_pin: !ebb36:PB7
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0) ## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below ## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed ## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config ## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
#position_endstop: -0.2 position_endstop: 0
position_max: 310 position_max: 310
position_min: -5 position_min: -5
homing_speed: 15 homing_speed: 15
@ -404,39 +404,44 @@ sensor_type: temperature_mcu
# Macros # Macros
##################################################################### #####################################################################
[probe] ## Other parameters in config.cfg #[probe] ## Other parameters in config.cfg
pin: !ebb36:PB7 #pin: !ebb36:PB7
x_offset: 0.0 #x_offset: 0.0
y_offset: 0.0 #y_offset: 0.0
z_offset: 0.0 #z_offset: 0.0
speed: 15.0 # Speed (in mm/s) of the Z axis when probing. The default is 5mm/s. #speed: 15.0 # Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
samples: 2 #samples: 2
sample_retract_dist: 3.0 #sample_retract_dist: 3.0
samples_tolerance_retries: 1 #samples_tolerance_retries: 1
lift_speed: 10 #lift_speed: 10
activate_gcode: #activate_gcode:
G4 P200 ;Wait 200ms # G4 P200 ;Wait 200ms
SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.4 # SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.4 # SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.4 # SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT=0.4 # SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT=0.4
deactivate_gcode: #deactivate_gcode:
{% set run_current = printer.configfile.config['tmc2209 stepper_z'].run_current | float %} # {% set run_current = printer.configfile.config['tmc2209 stepper_z'].run_current | float %}
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={run_current} # SET_TMC_CURRENT STEPPER=stepper_z CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={run_current} # SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={run_current} # SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={run_current} # SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={run_current}
[bed_mesh] [bed_mesh]
speed: 800 speed: 800
horizontal_move_z: 3 horizontal_move_z: 3
mesh_min: 0, 0 mesh_min: 30, 30
mesh_max: 310, 310 mesh_max: 310, 310
zero_reference_position: 175, 175 zero_reference_position: 175, 175
# #mesh_pps: 9, 9 mesh_pps: 9, 9
algorithm: bicubic algorithm: bicubic
bicubic_tension: 0.2 bicubic_tension: 0.2
probe_count: 7,7 probe_count: 9,9
[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BTT_BED_MESH_CALIBRATE
gcode:
BTT_BED_MESH_CALIBRATE METHOD=rapid_scan
[input_shaper] [input_shaper]
shaper_freq_x: 91.4 shaper_freq_x: 91.4
@ -446,18 +451,18 @@ shaper_type: 3hump_ei
[mcu eddy] [mcu eddy]
canbus_uuid: 01dd4779f312 canbus_uuid: 01dd4779f312
#[probe_eddy_current btt_eddy] [probe_eddy_current btt_eddy]
#sensor_type: ldc1612 sensor_type: ldc1612
#z_offset: 2.01 z_offset: 2.01
#i2c_mcu: eddy i2c_mcu: eddy
#i2c_bus: i2c0f i2c_bus: i2c0f
#x_offset: 0 x_offset: 0
#y_offset: 21.42 y_offset: 21.42
#[temperature_probe btt_eddy] [temperature_probe btt_eddy]
#sensor_type: Generic 3950 sensor_type: Generic 3950
#sensor_pin: eddy:gpio26 sensor_pin: eddy:gpio26
#horizontal_move_z: 2 horizontal_move_z: 2
[gcode_macro PROBE_EDDY_CURRENT_CALIBRATE_AUTO] [gcode_macro PROBE_EDDY_CURRENT_CALIBRATE_AUTO]
gcode: gcode:
@ -479,27 +484,79 @@ enable_force_move: True
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# -0.013814, 0.002245, 0.005321, 0.037976, 0.048046, 0.060540, 0.070946, 0.056286, 0.060975 #*# -0.042300, -0.024348, -0.036666, -0.017664, -0.025407, -0.050054, 0.017329, -0.031042, -0.038785
#*# -0.001514, -0.003904, 0.018992, 0.015656, 0.024350, 0.037976, 0.057306, 0.054291, 0.038143 #*# -0.007723, -0.005574, 0.027356, 0.013756, -0.021179, 0.013756, 0.069095, 0.045122, 0.025202
#*# -0.032466, -0.007290, 0.009769, 0.005321, 0.029468, 0.034263, 0.062378, 0.049342, 0.044221 #*# 0.008027, 0.002299, 0.038640, 0.015910, 0.011601, -0.013425, 0.045122, 0.027356, 0.011601
#*# -0.041181, -0.025479, -0.007925, -0.000403, 0.004208, 0.031030, 0.042659, 0.031605, 0.029899 #*# -0.007728, 0.000155, 0.029732, 0.033775, 0.023415, 0.011601, 0.003728, 0.015910, 0.029732
#*# -0.059714, -0.035092, -0.003052, -0.006128, -0.000229, 0.008656, 0.032592, 0.019419, 0.030166 #*# -0.021179, 0.020556, 0.001942, 0.000155, 0.000155, -0.004864, 0.015910, 0.005883, 0.002299
#*# -0.062837, -0.016463, -0.010738, 0.004044, -0.000826, 0.024083, 0.047180, 0.033722, 0.040834 #*# -0.033151, 0.029732, 0.008027, 0.013756, 0.011601, 0.012678, 0.065388, -0.005574, 0.021628
#*# -0.040349, -0.016038, 0.003360, 0.008820, 0.014120, 0.031030, 0.053163, 0.038785, 0.043882 #*# -0.004144, 0.008027, 0.019484, 0.054030, 0.049165, 0.033775, 0.069095, 0.003014, 0.013756
#*# -0.027854, -0.012273, 0.009507, 0.015658, 0.020269, 0.042397, 0.052996, 0.039967, 0.049342 #*# -0.038785, -0.004144, 0.042683, 0.042683, 0.032972, 0.021628, 0.062950, 0.045122, -0.023288
#*# -0.021443, -0.001939, 0.002669, 0.013694, 0.017621, 0.031032, 0.048044, 0.044225, 0.041100 #*# -0.002000, -0.021179, 0.003728, 0.019484, -0.013425, 0.013756, 0.038640, -0.034557, -0.015545
#*# x_count = 9 #*# x_count = 9
#*# y_count = 9 #*# y_count = 9
#*# mesh_x_pps = 9 #*# mesh_x_pps = 9
#*# mesh_y_pps = 9 #*# mesh_y_pps = 9
#*# algo = bicubic #*# algo = bicubic
#*# tension = 0.2 #*# tension = 0.2
#*# min_x = 35.0 #*# min_x = 30.0
#*# max_x = 309.96 #*# max_x = 310.0
#*# min_y = 35.0 #*# min_y = 30.0
#*# max_y = 309.96000000000004 #*# max_y = 310.0
#*# #*#
#*# [skew_correction calilantern_skew_profile] #*# [skew_correction calilantern_skew_profile]
#*# xy_skew = 0.007318697823262824 #*# xy_skew = 0.007318697823262824
#*# xz_skew = 0.0004313347372552723 #*# xz_skew = 0.0004313347372552723
#*# yz_skew = -0.0005939714989857676 #*# yz_skew = -0.0005939714989857676
#*#
#*# [probe_eddy_current btt_eddy]
#*# reg_drive_current = 15
#*# calibrate =
#*# 0.050000:3257588.070,0.090000:3256964.916,0.130000:3256304.573,
#*# 0.170000:3255627.762,0.210000:3254987.031,0.250000:3254339.955,
#*# 0.290000:3253702.183,0.330000:3253055.241,0.370000:3252462.920,
#*# 0.410000:3251870.953,0.450000:3251222.715,0.490000:3250619.815,
#*# 0.530000:3250006.877,0.570000:3249441.817,0.610000:3248836.353,
#*# 0.650000:3248246.169,0.690000:3247681.761,0.730000:3247143.636,
#*# 0.770000:3246541.450,0.810000:3246011.719,0.850000:3245477.255,
#*# 0.890000:3244924.790,0.930000:3244401.932,0.970000:3243850.098,
#*# 1.010000:3243383.419,1.050000:3242812.820,1.090000:3242313.228,
#*# 1.130000:3241788.575,1.170000:3241304.196,1.210000:3240811.189,
#*# 1.250000:3240330.713,1.290000:3239850.828,1.330000:3239431.896,
#*# 1.370000:3238915.608,1.410000:3238479.186,1.450000:3238017.048,
#*# 1.490000:3237583.714,1.530000:3237154.934,1.570000:3236718.382,
#*# 1.610000:3236280.224,1.650000:3235872.001,1.690000:3235459.235,
#*# 1.730000:3235049.059,1.770000:3234643.809,1.810000:3234254.456,
#*# 1.850000:3233866.757,1.890000:3233490.216,1.930000:3233109.405,
#*# 1.970000:3232746.999,2.010000:3232379.923,2.050000:3232006.220,
#*# 2.090000:3231658.941,2.130000:3231313.139,2.170000:3230957.177,
#*# 2.210000:3230633.999,2.250000:3230307.913,2.290000:3229966.771,
#*# 2.330000:3229649.263,2.370000:3229335.018,2.410000:3229011.378,
#*# 2.450000:3228712.819,2.490000:3228417.910,2.530000:3228108.281,
#*# 2.570000:3227815.038,2.610000:3227532.720,2.650000:3227249.805,
#*# 2.690000:3226976.764,2.730000:3226686.376,2.770000:3226417.626,
#*# 2.810000:3226166.807,2.850000:3225899.633,2.890000:3225606.227,
#*# 2.930000:3225383.271,2.970000:3225140.767,3.010000:3224884.488,
#*# 3.050000:3224632.580,3.090000:3224375.721,3.130000:3224165.999,
#*# 3.170000:3223942.487,3.210000:3223723.353,3.250000:3223477.094,
#*# 3.290000:3223247.144,3.330000:3223043.429,3.370000:3222823.368,
#*# 3.410000:3222588.610,3.450000:3222381.195,3.490000:3222221.090,
#*# 3.530000:3221989.948,3.570000:3221809.201,3.610000:3221622.117,
#*# 3.650000:3221392.225,3.690000:3221206.721,3.730000:3221051.522,
#*# 3.770000:3220834.386,3.810000:3220690.522,3.850000:3220499.700,
#*# 3.890000:3220307.943,3.930000:3220149.243,3.970000:3219964.886,
#*# 4.010000:3219791.608,4.050000:3219632.208
#*#
#*# [temperature_probe btt_eddy]
#*# calibration_temp = 39.478475
#*# drift_calibration =
#*# 3283778.235798, -965.466451, 7.227764
#*# 3268264.899482, -672.371276, 4.751202
#*# 3255073.726147, -430.741384, 2.745695
#*# 3244394.549464, -246.759626, 1.241065
#*# 3234441.269724, -51.153784, -0.446005
#*# 3227424.139563, 62.633837, -1.378854
#*# 3222282.704100, 131.724886, -1.919297
#*# 3217484.155747, 210.709950, -2.581193
#*# 3214114.202863, 253.314424, -2.921597
#*# drift_calibration_min_temp = 39.40781081763649