diff --git a/martyn_macros.cfg b/martyn_macros.cfg index 39e1d83..2c09f33 100644 --- a/martyn_macros.cfg +++ b/martyn_macros.cfg @@ -102,7 +102,7 @@ gcode: variable_start_x: 101 variable_start_y: 350 variable_start_z: 0 -variable_wipe_dist: 40 +variable_wipe_dist: -40 variable_wipe_qty: 5 variable_wipe_spd: 200 variable_raise_distance: 30 diff --git a/printer.cfg b/printer.cfg index d53332e..4147f5c 100644 --- a/printer.cfg +++ b/printer.cfg @@ -442,6 +442,16 @@ mesh_runs: 2 [force_move] enable_force_move: True +[homing_override] +; The ebb36 mount often catches on the drag chain at the back of the printer. +; This ensures that if X is asked to be homed, first Y is homed and then y is +; moved away from the back of the printer and then homed. +axes: x +gcode: + G28 Y0 + G0 Y20 + G28 X0 + # Let's not yet... #[filament_motion_sensor encoder_sensor] #switch_pin: PG12 @@ -471,20 +481,20 @@ enable_force_move: True #*# model_domain = 3.1514820782885167e-07,3.3326149736881295e-07 #*# model_range = 0.100000,5.000000 #*# model_temp = 37.720820 -#*# model_offset = 0.00000 +#*# model_offset = 0.15000 #*# model_mode = scan #*# model_fw_version = CARTOGRAPHER 5.1.0 #*# #*# [bed_mesh default] #*# version = 1 #*# points = -#*# 0.028119, 0.021350, 0.035768, 0.037817, 0.058624, 0.048990, 0.041621 -#*# 0.002778, 0.012887, 0.026730, 0.029246, 0.045860, 0.049879, 0.028868 -#*# -0.009352, -0.003317, 0.002544, 0.002204, 0.017719, 0.020697, -0.010159 -#*# -0.004043, 0.012978, 0.019278, 0.013789, 0.021977, 0.028709, 0.005472 -#*# 0.007038, 0.015163, 0.027293, 0.015055, 0.030960, 0.025225, -0.000673 -#*# 0.003944, 0.019688, 0.038635, 0.025704, 0.046517, 0.041377, 0.012221 -#*# 0.039148, 0.045802, 0.060291, 0.050468, 0.067409, 0.072452, 0.040640 +#*# 0.038049, 0.033443, 0.046620, 0.045980, 0.068916, 0.058127, 0.050284 +#*# 0.013975, 0.021985, 0.036277, 0.037763, 0.056129, 0.038217, 0.017225 +#*# -0.001053, 0.003695, 0.007177, 0.006227, 0.019149, 0.021600, -0.010771 +#*# -0.005999, 0.010618, 0.016111, 0.015814, 0.015824, 0.023147, 0.000558 +#*# 0.010902, 0.017401, 0.026787, 0.013984, 0.029697, 0.023782, -0.002451 +#*# 0.009438, 0.025120, 0.043248, 0.025485, 0.046232, 0.040130, 0.010416 +#*# 0.051986, 0.058225, 0.072224, 0.060504, 0.077500, 0.081257, 0.049641 #*# x_count = 7 #*# y_count = 7 #*# mesh_x_pps = 7