From 6a08a93eb4023a7d61a91a0a09e0d1aa81409d77 Mon Sep 17 00:00:00 2001 From: Martyn <m@rtyn.berlin> Date: Sat, 8 Mar 2025 15:09:13 +0000 Subject: [PATCH] Changes from 2025-03-08 --- printer.cfg | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/printer.cfg b/printer.cfg index 8b4f300..77b0ce8 100644 --- a/printer.cfg +++ b/printer.cfg @@ -448,7 +448,7 @@ trigger_dive_threshold: 1.5 trigger_hysteresis: 0.006 # Hysteresis on trigger threshold for untriggering, as a percentage of the # trigger threshold. -cal_nozzle_z: 1 +cal_nozzle_z: 1.01 # Expected nozzle offset after completing manual Z offset calibration. cal_floor: 0.1 # Minimum z bound on sensor response measurement. @@ -494,13 +494,13 @@ enable_force_move: True #*# [bed_mesh default] #*# version = 1 #*# points = -#*# -0.007260, -0.009008, 0.008756, 0.008981, 0.030512, 0.027886, 0.010385 -#*# -0.002193, 0.002410, 0.014032, 0.013748, 0.026540, 0.023732, -0.006151 -#*# -0.003217, -0.007009, -0.000774, -0.004846, 0.012255, 0.006816, -0.020813 -#*# 0.006067, 0.009634, 0.012482, 0.006450, 0.011653, 0.009015, -0.014982 -#*# 0.017737, 0.012547, 0.021961, 0.012257, 0.029864, 0.020473, -0.007198 -#*# 0.001319, 0.008503, 0.024151, 0.002757, 0.028500, 0.022929, -0.006922 -#*# 0.028400, 0.022465, 0.031641, 0.018925, 0.034983, 0.037538, 0.007570 +#*# -0.003533, -0.005002, 0.003404, 0.003507, 0.025479, 0.025281, 0.007574 +#*# -0.002208, 0.000898, 0.009734, 0.006727, 0.018390, 0.014991, -0.015251 +#*# -0.003756, -0.009080, -0.002615, -0.006567, 0.011256, 0.002997, -0.022717 +#*# 0.004205, 0.007003, 0.009272, 0.003366, 0.007445, 0.006189, -0.009176 +#*# 0.015139, 0.009846, 0.017376, 0.008070, 0.026340, 0.017761, -0.009416 +#*# -0.000791, 0.005625, 0.020841, -0.001097, 0.026055, 0.020826, -0.006894 +#*# 0.026537, 0.020486, 0.028938, 0.017259, 0.032888, 0.037126, 0.003887 #*# x_count = 7 #*# y_count = 7 #*# mesh_x_pps = 7 @@ -516,9 +516,9 @@ enable_force_move: True #*# z_offset = 7.600 #*# #*# [skew_correction calilantern_skew_profile] -#*# xy_skew = 0.0074462965124288275 -#*# xz_skew = 0.0009617083385249239 -#*# yz_skew = 0.0024679134438297754 +#*# xy_skew = 0.007318697823262824 +#*# xz_skew = 0.0004313347372552723 +#*# yz_skew = -0.0005939714989857676 #*# #*# [cartographer model default] #*# model_coef = 1.7011389525218636,