From 52f7ae08319b14316b73774b37defcc8d1a4617d Mon Sep 17 00:00:00 2001
From: Martyn <m@rtyn.berlin>
Date: Sat, 8 Mar 2025 15:09:13 +0000
Subject: [PATCH] Changes from 2025-03-08

---
 printer.cfg | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/printer.cfg b/printer.cfg
index 77b0ce8..021b3be 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -429,7 +429,7 @@ speed: 40.
 #   Z probing dive speed.
 lift_speed: 5.0
 #   Z probing lift speed.
-backlash_comp: 0.5
+backlash_comp: 0.00460
 #   Backlash compensation distance for removing Z backlash before measuring
 #   the sensor response.
 # 
@@ -448,7 +448,7 @@ trigger_dive_threshold: 1.5
 trigger_hysteresis: 0.006
 #   Hysteresis on trigger threshold for untriggering, as a percentage of the
 #   trigger threshold.
-cal_nozzle_z: 1.01
+cal_nozzle_z: 0.98
 #   Expected nozzle offset after completing manual Z offset calibration.
 cal_floor: 0.1
 #   Minimum z bound on sensor response measurement.
@@ -494,13 +494,13 @@ enable_force_move: True
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  -0.003533, -0.005002, 0.003404, 0.003507, 0.025479, 0.025281, 0.007574
-#*# 	  -0.002208, 0.000898, 0.009734, 0.006727, 0.018390, 0.014991, -0.015251
-#*# 	  -0.003756, -0.009080, -0.002615, -0.006567, 0.011256, 0.002997, -0.022717
-#*# 	  0.004205, 0.007003, 0.009272, 0.003366, 0.007445, 0.006189, -0.009176
-#*# 	  0.015139, 0.009846, 0.017376, 0.008070, 0.026340, 0.017761, -0.009416
-#*# 	  -0.000791, 0.005625, 0.020841, -0.001097, 0.026055, 0.020826, -0.006894
-#*# 	  0.026537, 0.020486, 0.028938, 0.017259, 0.032888, 0.037126, 0.003887
+#*# 	-0.003533, -0.005002, 0.003404, 0.003507, 0.025479, 0.025281, 0.007574
+#*# 	-0.002208, 0.000898, 0.009734, 0.006727, 0.018390, 0.014991, -0.015251
+#*# 	-0.003756, -0.009080, -0.002615, -0.006567, 0.011256, 0.002997, -0.022717
+#*# 	0.004205, 0.007003, 0.009272, 0.003366, 0.007445, 0.006189, -0.009176
+#*# 	0.015139, 0.009846, 0.017376, 0.008070, 0.026340, 0.017761, -0.009416
+#*# 	-0.000791, 0.005625, 0.020841, -0.001097, 0.026055, 0.020826, -0.006894
+#*# 	0.026537, 0.020486, 0.028938, 0.017259, 0.032888, 0.037126, 0.003887
 #*# x_count = 7
 #*# y_count = 7
 #*# mesh_x_pps = 7
@@ -521,17 +521,17 @@ enable_force_move: True
 #*# yz_skew = -0.0005939714989857676
 #*#
 #*# [cartographer model default]
-#*# model_coef = 1.7011389525218636,
-#*# 	1.7526238976025272,
-#*# 	0.8487139252823895,
-#*# 	-0.28979887136723204,
-#*# 	-0.14035215893545008,
-#*# 	2.7052626869274996,
-#*# 	-0.7097390559014733,
-#*# 	-2.305783187376014,
-#*# 	0.8517414798585133,
-#*# 	0.5886570406202946
-#*# model_domain = 3.163515280956241e-07,3.3208076740804915e-07
+#*# model_coef = 1.7790216397966745,
+#*# 	  1.682179489878639,
+#*# 	  0.54354835718582,
+#*# 	  0.18525430210828908,
+#*# 	  1.2834114054213566,
+#*# 	  0.14655121504756635,
+#*# 	  -2.5311221371746115,
+#*# 	  1.3024007230297336,
+#*# 	  1.4752887555326206,
+#*# 	  -0.8653499475386279
+#*# model_domain = 3.0808256807277605e-07,3.309078769305056e-07
 #*# model_range = 0.100000,5.000000
-#*# model_temp = 39.151410
+#*# model_temp = 50.441484
 #*# model_offset = 0.00000