martyn/voronklipperconfig
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Automatic commit of config from 2025-04-01

Browse source
This commit is contained in:
Martyn 2025-04-01 15:17:35 +01:00
parent 758b6c0313
commit 4c05b7ba0f
4 changed files with 18 additions and 11 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
martyn_macros.cfg
View file

@ -25,17 +25,17 @@ gcode:
CLEAN_NOZZLE
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
SET_GCODE_OFFSET Z_ADJUST=-0.4 MOVE=1 ; This is how we will permanently save the Z offset without having to care about type of probe.
SET_GCODE_OFFSET Z_ADJUST=-0.48 MOVE=1 ; This is how we will permanently save the Z offset without having to care about type of probe.
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
G1 E-2 ; Retract before cleaning, or we will still have stringing
G1 E-1 ; Retract before cleaning, or we will still have stringing
CLEAN_NOZZLE ; doing this again is probably gonna make it work!
SKEW_PROFILE LOAD=calilantern_skew_profile
G1 E0 ; "UnRetract" (I forgot we were in absolutes!)
G1 E-0.1 ; "UnRetract" (I forgot we were in absolutes!)
STATUS_PRINTING
# Use PRINT_END for the slicer ending script - please customise for your slicer of choice

1
mmu/base/mmu.cfg
View file

@ -109,6 +109,7 @@ aliases:
MMU_GEAR_DIR=gpio1,
MMU_GEAR_ENABLE=gpio3,
MMU_GEAR_DIAG=gpio22,
MMU_SEL_SERVO=gpio21,
[temperature_sensor MMB]
sensor_type: temperature_mcu

4
mmu/base/mmu_hardware.cfg
View file

@ -203,7 +203,7 @@ endstop_name: mmu_sel_home
# SELECTOR SERVO -------------------------------------------------------------------------------------------------------
#
[mmu_servo selector_servo]
pin: mmu:MMU_SEL_SERVO
pin: mmuext:MMU_SEL_SERVO
maximum_servo_angle: 180
minimum_pulse_width: 0.00085
maximum_pulse_width: 0.00215
@ -361,7 +361,7 @@ color_order: GRBW # Set based on your particular neopixel specification (can be
#
# (comment out this whole section if you don't have/want leds; uncomment/edit LEDs fitted on your MMU)
[mmu_leds]
exit_leds: neopixel:mmu_leds (1-8)
exit_leds: neopixel:mmu_leds (8-1)
#entry_leds: neopixel:mmu_leds (9-16)
#status_leds: neopixel:mmu_leds (17)
#logo_leds: neopixel:mmu_leds (18)

18
mmu/mmu_vars.cfg
View file

@ -1,5 +1,5 @@
[Variables]
mmu__revision = 1204
mmu__revision = 1406
mmu_calibration_bowden_home = 'encoder'
mmu_calibration_bowden_lengths = [1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1, 1425.1]
mmu_calibration_clog_length = 17.4
@ -9,16 +9,22 @@ mmu_selector_bypass = 179.2
mmu_selector_offsets = [2.0, 25.3, 48.5, 71.8, 95.0, 118.3, 141.5, 164.8]
mmu_servo_angles = {'down': 55, 'up': 148, 'move': 110}
mmu_state_enable_endless_spool = 1
mmu_state_endless_spool_groups = [0, 0, 1, 1, 1, 1, 1, 1]
mmu_state_endless_spool_groups = [0, 1, 2, 3, 4, 5, 6, 7]
mmu_state_filament_pos = 10
mmu_state_filament_remaining = 0.0
mmu_state_filament_remaining_color = ''
mmu_state_gate_selected = -2
mmu_state_gate_status = [2, -1, 0, 0, 0, 0, 0, 0]
mmu_state_gate_color = ['', '', '', '', '', '', '', '']
mmu_state_gate_filament_name = ['', '', '', '', '', '', '', '']
mmu_state_gate_material = ['', '', '', '', '', '', '', '']
mmu_state_gate_selected = 5
mmu_state_gate_speed_override = [100, 100, 100, 100, 100, 100, 100, 100]
mmu_state_gate_spool_id = [-1, -1, -1, -1, -1, -1, -1, -1]
mmu_state_gate_status = [0, 0, 0, 0, 0, 0, 0, 0]
mmu_state_gate_temperature = [200, 200, 200, 200, 200, 200, 200, 200]
mmu_state_last_tool = 1
mmu_state_tool_selected = -2
mmu_state_tool_selected = 5
mmu_state_tool_to_gate_map = [0, 1, 2, 3, 4, 5, 6, 7]
mmu_statistics_counters = {'servo_down': {'count': 265, 'limit': 5000, 'warning': 'Inspect servo arm for wear/damage', 'pause': False}, 'mmu_restarts': {'count': 69, 'limit': -1, 'warning': ''}, 'cutter_blade': {'count': 43, 'limit': 3000, 'warning': 'Inspect/replace filament cutting blade', 'pause': False}}
mmu_statistics_counters = {'servo_down': {'count': 378, 'limit': 5000, 'warning': 'Inspect servo arm for wear/damage', 'pause': False}, 'mmu_restarts': {'count': 78, 'limit': -1, 'warning': ''}, 'cutter_blade': {'count': 43, 'limit': 3000, 'warning': 'Inspect/replace filament cutting blade', 'pause': False}}
mmu_statistics_gate_0 = {'pauses': 12, 'loads': 28, 'load_distance': 38354.336, 'load_delta': 6896.202, 'unloads': 43, 'unload_distance': 31567.3, 'unload_delta': 1877.741, 'load_failures': 7, 'unload_failures': 16, 'quality': 0.9546537865318246}
mmu_statistics_gate_1 = {'pauses': 2, 'loads': 22, 'load_distance': 28896.615, 'load_delta': 90.861, 'unloads': 25, 'unload_distance': 27502.0, 'unload_delta': 1483.93, 'load_failures': 1, 'unload_failures': 5, 'quality': 0.8375118313601163}
mmu_statistics_gate_2 = {'pauses': 0, 'loads': 0, 'load_distance': 0.0, 'load_delta': 0.0, 'unloads': 0, 'unload_distance': 0.0, 'unload_delta': 0.0, 'load_failures': 0, 'unload_failures': 0, 'quality': -1.0}