martyn/voronklipperconfig
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

PZ+Eddy, apart from print_start messes up

Browse source
This commit is contained in:
Martyn 2025-04-21 13:13:58 +01:00
parent 481350784d
commit 3c127c74b3
2 changed files with 127 additions and 107 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

134
martyn_macros.cfg
View file

@ -16,6 +16,8 @@ gcode:
M140 S0 ; turn off power to the bed, interference with probe? M140 S0 ; turn off power to the bed, interference with probe?
SET_GCODE_OFFSET Z=0.0 ; Reset the G-Code Z offset so we can set it manually later. we don't care if move=1|0 because we're about to home anyway. SET_GCODE_OFFSET Z=0.0 ; Reset the G-Code Z offset so we can set it manually later. we don't care if move=1|0 because we're about to home anyway.
G28 Z ; Heatsoaked, validate that z G28 Z ; Heatsoaked, validate that z
G90 ; ensure absolute positioning (how would it be something else?!
G1 Z10 F3000
QUAD_GANTRY_LEVEL QUAD_GANTRY_LEVEL
STATUS_MESHING STATUS_MESHING
BED_MESH_CALIBRATE BED_MESH_CALIBRATE
@ -25,7 +27,7 @@ gcode:
CLEAN_NOZZLE CLEAN_NOZZLE
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
SET_GCODE_OFFSET Z_ADJUST=-0.45 MOVE=1 ; This is how we will permanently save the Z offset without having to care about type of probe. #SET_GCODE_OFFSET Z_ADJUST=-0.45 MOVE=1 ; This is how we will permanently save the Z offset without having to care about type of probe.
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
@ -330,68 +332,80 @@ gcode:
G1 E-{unload_distance} F{max_velocity} # fast-unload G1 E-{unload_distance} F{max_velocity} # fast-unload
RESTORE_GCODE_STATE NAME=unload_state RESTORE_GCODE_STATE NAME=unload_state
# [gcode_macro _SAFE_X_HOME] [gcode_macro _SAFE_X_HOME]
# ; This macro is to ensure that we're not at y=home when X is homed. ; This macro is to ensure that we're not at y=home when X is homed.
# gcode: gcode:
# {% if 'Y' in printer.toolhead.homed_axes %} {% if 'Y' in printer.toolhead.homed_axes %}
# G91 G91
# G0 Y-20 F50000 G0 Y-20 F50000
# G90 G90
# {% else %} {% else %}
# G90 G90
# SET_KINEMATIC_POSITION Y=20 SET_KINEMATIC_POSITION Y=20
# G0 Y0 F50000 G0 Y0 F50000
# G28 X G28 X
# {% endif %} {% endif %}
# [gcode_macro _SAFE_Z_HOME_LIFT] [gcode_macro _SAFE_Z_HOME_LIFT]
# ; Lift the Z no matter what (replicate z-hop from [safe_z_home] ; Lift the Z no matter what (replicate z-hop from [safe_z_home]
# gcode: gcode:
# {% if 'Z' in printer.toolhead.homed_axes %} {% if 'Z' in printer.toolhead.homed_axes %}
# G91 G91
# G0 Z10 F1000 G0 Z10 F1000
# G90 G90
# {% else %} {% else %}
# G90 G90
# SET_KINEMATIC_POSITION Z=0 SET_KINEMATIC_POSITION Z=0
# G0 Z10 F1000 G0 Z10 F1000
# {% endif %} {% endif %}
# [gcode_macro _SAFE_Z_HOME] [gcode_macro _SAFE_Z_HOME]
# ; this macro recreates the save_z_home setup center the toolhead before z home. ; this macro recreates the save_z_home setup center the toolhead before z home.
# gcode: gcode:
# {% if not 'X' in printer.toolhead.homed_axes %} {% if not 'X' in printer.toolhead.homed_axes %}
# _SAFE_X_HOME _SAFE_X_HOME
# {% endif %} {% endif %}
# {% if not 'Y' in printer.toolhead.homed_axes %} {% if not 'Y' in printer.toolhead.homed_axes %}
# G28 Y G28 Y
# {% endif %} {% endif %}
# G0 X175 Y175 F50000 G0 X175 Y175 F50000
# G28 Z G4 P200 ;Wait 200ms
SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.4
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT=0.4
G28 Z
{% set run_current = printer.configfile.config['tmc2209 stepper_z'].run_current | float %}
SET_TMC_CURRENT STEPPER=stepper_z CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={run_current}
SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={run_current}
SET_KINEMATIC_POSITION Z=0
G0 Z10 F3000
# [homing_override] [homing_override]
# ; The ebb36 mount often catches on the drag chain at the back of the printer. ; The ebb36 mount often catches on the drag chain at the back of the printer.
# ; This ensures that if X is asked to be homed, first Y is homed and then y is ; This ensures that if X is asked to be homed, first Y is homed and then y is
# ; moved away from the back of the printer and then homed. ; moved away from the back of the printer and then homed.
# axes: xyz axes: xyz
# gcode: gcode:
# #z hop no matter what #z hop no matter what
# _SAFE_Z_HOME_LIFT _SAFE_Z_HOME_LIFT
# {% if not 'Z' in params and not 'Y' in params and 'X' in params %} # Home X {% if not 'Z' in params and not 'Y' in params and 'X' in params %} # Home X
# _SAFE_X_HOME _SAFE_X_HOME
# {% elif not 'Z' in params and not 'X' in params and 'Y' in params %} #Home Y {% elif not 'Z' in params and not 'X' in params and 'Y' in params %} #Home Y
# G28 Y G28 Y
# {% elif not 'Z' in params and 'X' in params and 'Y' in params %} #Home X+Y {% elif not 'Z' in params and 'X' in params and 'Y' in params %} #Home X+Y
# _SAFE_X_HOME _SAFE_X_HOME
# G28 Y G28 Y
# {% elif 'Z' in params and not 'X' in params and not 'Y' in params %} # Home Z {% elif 'Z' in params and not 'X' in params and not 'Y' in params %} # Home Z
# _SAFE_Z_HOME _SAFE_Z_HOME
# {% else %} #Home X+Y+Z {% else %} #Home X+Y+Z
# _SAFE_X_HOME _SAFE_X_HOME
# G28 Y G28 Y
# _SAFE_Z_HOME _SAFE_Z_HOME
# {% endif %} {% endif %}
[mmu_led_effect mmu_purple_slow] [mmu_led_effect mmu_purple_slow]
layers: breathing 1.0 0 top (1,0,1) layers: breathing 1.0 0 top (1,0,1)

100
printer.cfg
View file

@ -36,7 +36,7 @@ canbus_uuid: 970febd72165
[include fluidd.cfg] [include fluidd.cfg]
[include stealthburner_leds.cfg] [include stealthburner_leds.cfg]
[include bedfans.cfg] [include bedfans.cfg]
[include eddy_macros.cfg] #[include eddy_macros.cfg]
[include martyn_macros.cfg] [include martyn_macros.cfg]
[include shaketune.cfg] [include shaketune.cfg]
@ -118,16 +118,16 @@ enable_pin: !PG5
rotation_distance: 40 rotation_distance: 40
gear_ratio: 80:16 gear_ratio: 80:16
microsteps: 32 microsteps: 32
#endstop_pin: PG10 #endstop_pin: probe:z_virtual_endstop
endstop_pin:probe:z_virtual_endstop endstop_pin: !ebb36:PB7
## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0) ## Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
## (+) value = endstop above Z0, (-) value = endstop below ## (+) value = endstop above Z0, (-) value = endstop below
## Increasing position_endstop brings nozzle closer to the bed ## Increasing position_endstop brings nozzle closer to the bed
## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config ## After you run Z_ENDSTOP_CALIBRATE, position_endstop will be stored at the very end of your config
#position_endstop: -0.5 position_endstop: 0
position_max: 310 position_max: 310
position_min: -10 position_min: -10
homing_speed: 15 homing_speed: 5
second_homing_speed: 3 second_homing_speed: 3
homing_retract_dist: 3 homing_retract_dist: 3
@ -288,16 +288,16 @@ gcode_id: chamber_th
timeout: 1800 timeout: 1800
# Need to work out how eddy interferes with magic home # Need to work out how eddy interferes with magic home
[safe_z_home] #[safe_z_home]
## XY Location of the Z Endstop Switch ## XY Location of the Z Endstop Switch
## Update -10,-10 to the XY coordinates of your endstop pin ## Update -10,-10 to the XY coordinates of your endstop pin
## (such as 157,305) after going through Z Endstop Pin ## (such as 157,305) after going through Z Endstop Pin
## Location Definition step. ## Location Definition step.
#home_xy_position:232,350 #home_xy_position:232,350
home_xy_position: 175,175 #home_xy_position: 175,175
speed:100 #speed:100
z_hop:10 #z_hop:10
z_hop_speed:10 #z_hop_speed:10
## Use QUAD_GANTRY_LEVEL to level a gantry. ## Use QUAD_GANTRY_LEVEL to level a gantry.
@ -391,25 +391,32 @@ sensor_type: temperature_mcu
# Macros # Macros
##################################################################### #####################################################################
#[probe] ## Other parameters in config.cfg
# pre-cartographer #pin: !ebb36:PB7
# [probe] #x_offset: 0.0
# pin: ebb36:PB9 #y_offset: 0.0
# x_offset: 0 #z_offset: 0.0
# y_offset: 19.75 #speed: 5.0 # Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
# #z_offset: 5.930 #samples: 2
# # below is default, trying -0.365 measured, if +0.365, it's 6.785 #sample_retract_dist: 3.0
# # z_offset: 6.42 #samples_tolerance_retries: 1
# speed: 5 #lift_speed: 10
# samples: 3 #activate_gcode:
# samples_result: median # G4 P200 ;Wait 200ms
# sample_retract_dist: 2.0 # SET_TMC_CURRENT STEPPER=stepper_z CURRENT=0.4
# samples_tolerance: 0.01 # SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT=0.4
# samples_tolerance_retries: 4 # SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT=0.4
# SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT=0.4
#deactivate_gcode:
# {% set run_current = printer.configfile.config['tmc2209 stepper_z'].run_current | float %}
# SET_TMC_CURRENT STEPPER=stepper_z CURRENT={run_current}
# SET_TMC_CURRENT STEPPER=stepper_z1 CURRENT={run_current}
# SET_TMC_CURRENT STEPPER=stepper_z2 CURRENT={run_current}
# SET_TMC_CURRENT STEPPER=stepper_z3 CURRENT={run_current}
[bed_mesh] [bed_mesh]
speed: 200 speed: 200
horizontal_move_z: 2 horizontal_move_z: 3
mesh_min: 35, 35 mesh_min: 35, 35
mesh_max: 310, 310 mesh_max: 310, 310
zero_reference_position: 175, 175 zero_reference_position: 175, 175
@ -439,36 +446,35 @@ sensor_type: Generic 3950
sensor_pin: eddy:gpio26 sensor_pin: eddy:gpio26
horizontal_move_z: 2 horizontal_move_z: 2
[gcode_macro PROBE_EDDY_CURRENT_CALIBRATE_AUTO]
gcode:
BED_MESH_CLEAR
G28 X Y
G90 # Abs positioning
G1 X{ printer.toolhead.axis_maximum.x/2 } Y{ printer.toolhead.axis_maximum.y/2 } F6000
{% if 'z' not in printer.toolhead.homed_axes %}
SET_KINEMATIC_POSITION Z={ printer.toolhead.axis_maximum.z-1 } # Allows the user to work it down until it touches.
{% endif %}
PROBE_EDDY_CURRENT_CALIBRATE {rawparams}
[force_move] [force_move]
enable_force_move: True enable_force_move: True
# Let's not yet...
#[filament_motion_sensor encoder_sensor]
#switch_pin: PG12
#detection_length: 2.88
#extruder: extruder
#pause_on_runout: False
#runout_gcode:
# PAUSE # [pause_resume] is required in printer.cfg
# M117 Filament encoder runout
#insert_gcode:
# M117 Filament encoder inserted
#*# <---------------------- SAVE_CONFIG ----------------------> #*# <---------------------- SAVE_CONFIG ---------------------->
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated. #*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
#*# #*#
#*# [bed_mesh default] #*# [bed_mesh default]
#*# version = 1 #*# version = 1
#*# points = #*# points =
#*# -0.009752, -0.002567, -0.002418, 0.024205, 0.023133, 0.034214, 0.043152, 0.023689, 0.019876 #*# -0.013814, 0.002245, 0.005321, 0.037976, 0.048046, 0.060540, 0.070946, 0.056286, 0.060975
#*# -0.010467, 0.005144, 0.009298, 0.020234, 0.017335, 0.019320, 0.050222, 0.023133, 0.012251 #*# -0.001514, -0.003904, 0.018992, 0.015656, 0.024350, 0.037976, 0.057306, 0.054291, 0.038143
#*# -0.015067, -0.008072, 0.008400, 0.001699, 0.002224, 0.006005, 0.032586, 0.017454, 0.006868 #*# -0.032466, -0.007290, 0.009769, 0.005321, 0.029468, 0.034263, 0.062378, 0.049342, 0.044221
#*# -0.032029, -0.022778, -0.015593, -0.005487, 0.000614, 0.001551, 0.017335, -0.000508, -0.004438 #*# -0.041181, -0.025479, -0.007925, -0.000403, 0.004208, 0.031030, 0.042659, 0.031605, 0.029899
#*# -0.049611, -0.034939, -0.013534, -0.020047, -0.000172, -0.003281, 0.009074, -0.003953, -0.016267 #*# -0.059714, -0.035092, -0.003052, -0.006128, -0.000229, 0.008656, 0.032592, 0.019419, 0.030166
#*# -0.037046, -0.016647, -0.014397, -0.011667, 0.001699, 0.004956, 0.013322, -0.001182, -0.004289 #*# -0.062837, -0.016463, -0.010738, 0.004044, -0.000826, 0.024083, 0.047180, 0.033722, 0.040834
#*# -0.023830, -0.015781, 0.013680, -0.001369, 0.004619, 0.011852, 0.026403, 0.009747, -0.001706 #*# -0.040349, -0.016038, 0.003360, 0.008820, 0.014120, 0.031030, 0.053163, 0.038785, 0.043882
#*# -0.027613, -0.002580, 0.005144, 0.008737, 0.005144, 0.027502, 0.034771, 0.019320, 0.017335 #*# -0.027854, -0.012273, 0.009507, 0.015658, 0.020269, 0.042397, 0.052996, 0.039967, 0.049342
#*# -0.020910, -0.010278, 0.004807, 0.005144, 0.003946, 0.018764, 0.027145, 0.012608, 0.006342 #*# -0.021443, -0.001939, 0.002669, 0.013694, 0.017621, 0.031032, 0.048044, 0.044225, 0.041100
#*# x_count = 9 #*# x_count = 9
#*# y_count = 9 #*# y_count = 9
#*# mesh_x_pps = 9 #*# mesh_x_pps = 9