diff --git a/printer.cfg b/printer.cfg
index 62a3392..c44ec44 100644
--- a/printer.cfg
+++ b/printer.cfg
@@ -379,51 +379,8 @@ sensor_type: temperature_mcu
 #   Macros
 #####################################################################
 
-[gcode_macro G32]
-gcode:
-    SAVE_GCODE_STATE NAME=STATE_G32
-    G90
-    G28
-    QUAD_GANTRY_LEVEL
-    G28
-    ##  Uncomment for for your size printer:
-    #--------------------------------------------------------------------
-    ##  Uncomment for 250mm build
-    #G0 X125 Y125 Z30 F3600
-    
-    ##  Uncomment for 300 build
-    #G0 X150 Y150 Z30 F3600
-    
-    ##  Uncomment for 350mm build
-    G0 X175 Y175 Z30 F3600
-    #--------------------------------------------------------------------
-    RESTORE_GCODE_STATE NAME=STATE_G32
 
 
-#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
-[gcode_macro PRINT_END]
-gcode:
-    # safe anti-stringing move coords
-    {% set th = printer.toolhead %}
-    {% set x_safe = th.position.x + 20 * (1 if th.axis_maximum.x - th.position.x > 20 else -1) %}
-    {% set y_safe = th.position.y + 20 * (1 if th.axis_maximum.y - th.position.y > 20 else -1) %}
-    {% set z_safe = [th.position.z + 2, th.axis_maximum.z]|min %}
-    
-    SAVE_GCODE_STATE NAME=STATE_PRINT_END
-    
-    M400                           ; wait for buffer to clear
-    G92 E0                         ; zero the extruder
-    G1 E-5.0 F1800                 ; retract filament
-    
-    TURN_OFF_HEATERS
-    
-    G90                                      ; absolute positioning
-    G0 X{x_safe} Y{y_safe} Z{z_safe} F20000  ; move nozzle to remove stringing
-    G0 X{th.axis_maximum.x//2} Y{th.axis_maximum.y - 2} F3600  ; park nozzle at rear
-    M107                                     ; turn off fan
-    
-    RESTORE_GCODE_STATE NAME=STATE_PRINT_END
-
 [probe]
 pin: ebb36:PB8
 x_offset: 0
@@ -442,7 +399,7 @@ samples_tolerance_retries: 3
 speed: 120
 horizontal_move_z: 10
 mesh_min: 35, 35
-mesh_max: 320, 320
+mesh_max: 310, 310
 zero_reference_position: 175, 175
 #probe_count: 5, 5
 mesh_pps: 3, 3
@@ -464,13 +421,13 @@ shaper_type: 3hump_ei
 #*# [bed_mesh default]
 #*# version = 1
 #*# points =
-#*# 	  0.012788, 0.024038, 0.050288, 0.027788, 0.041538, 0.025288, 0.050288
-#*# 	  0.001538, 0.002788, 0.010288, 0.009038, 0.042788, 0.024038, 0.011538
-#*# 	  0.006538, -0.018462, 0.009038, -0.027212, 0.010288, 0.012788, 0.016538
-#*# 	  -0.029712, -0.030962, -0.017212, 0.001538, -0.019712, -0.000962, -0.002212
-#*# 	  -0.019712, -0.008462, -0.013462, -0.009712, 0.007788, -0.002212, 0.002788
-#*# 	  0.012788, 0.010288, 0.004038, -0.009712, 0.040288, 0.054038, 0.007788
-#*# 	  0.025288, 0.045288, 0.077788, 0.077788, 0.104038, 0.051538, 0.054038
+#*# 	0.012788, 0.024038, 0.050288, 0.027788, 0.041538, 0.025288, 0.050288
+#*# 	0.001538, 0.002788, 0.010288, 0.009038, 0.042788, 0.024038, 0.011538
+#*# 	0.006538, -0.018462, 0.009038, -0.027212, 0.010288, 0.012788, 0.016538
+#*# 	-0.029712, -0.030962, -0.017212, 0.001538, -0.019712, -0.000962, -0.002212
+#*# 	-0.019712, -0.008462, -0.013462, -0.009712, 0.007788, -0.002212, 0.002788
+#*# 	0.012788, 0.010288, 0.004038, -0.009712, 0.040288, 0.054038, 0.007788
+#*# 	0.025288, 0.045288, 0.077788, 0.077788, 0.104038, 0.051538, 0.054038
 #*# x_count = 7
 #*# y_count = 7
 #*# mesh_x_pps = 3
@@ -484,3 +441,8 @@ shaper_type: 3hump_ei
 #*#
 #*# [probe]
 #*# z_offset = 5.880
+#*#
+#*# [skew_correction calilantern_skew_profile]
+#*# xy_skew = 0.008146115207013459
+#*# xz_skew = 0.0008273174781853165
+#*# yz_skew = -0.00037476759249049555