Initial carto config

fluidd.cfg

@@ -0,0 +1 @@
+/home/pi/fluidd-config/fluidd.cfg

moonraker.conf

@@ -0,0 +1,44 @@
+[server]
+host: 0.0.0.0
+port: 7125
+klippy_uds_address: /home/pi/printer_data/comms/klippy.sock
+
+[authorization]
+trusted_clients:
+    172.20.0.0/16
+    10.0.0.0/8
+    127.0.0.0/8
+    169.254.0.0/16
+    172.16.0.0/12
+    192.168.0.0/16
+    FC00::/7
+    FE80::/10
+    ::1/128
+cors_domains:
+    *.lan
+    *.local
+    *://localhost
+    *://localhost:*
+    *://my.mainsail.xyz
+    *://app.fluidd.xyz
+    
+[octoprint_compat]
+
+[history]
+
+[update_manager]
+channel: dev
+refresh_interval: 168
+
+[update_manager fluidd]
+path: /home/pi/fluidd
+repo: fluidd-core/fluidd
+channel: stable
+type: web
+
+[update_manager fluidd-config]
+managed_services: klipper
+origin: https://github.com/fluidd-core/fluidd-config.git
+path: /home/pi/fluidd-config
+primary_branch: master
+type: git_repo

printer.cfg

@@ -0,0 +1,205 @@
+[include fluidd.cfg]
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_sam4e8e_003230533553504E3138303439303337-if00
+restart_method: command
+
+[virtual_sdcard]
+path: /home/pi/printer_data/gcodes
+on_error_gcode: CANCEL_PRINT
+
+[printer]
+kinematics: cartesian
+max_velocity: 700
+max_accel: 3300
+max_z_velocity: 15
+max_z_accel: 350
+
+[stepper_x]
+step_pin: PD6
+dir_pin: PD11
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 23
+endstop_pin: ^!PC14
+position_endstop: 0
+position_max: 210
+homing_speed: 70   #Max 100
+
+[tmc2660 stepper_x]
+cs_pin: PD14
+spi_bus: usart1
+run_current: 0.8
+sense_resistor: 0.051
+
+[stepper_y]
+step_pin: PD7
+dir_pin: !PD12
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 23
+endstop_pin: ^!PA2
+position_endstop: 150 # Actually about 166
+position_max: 150
+position_min: 0 # Actually about 16
+homing_speed: 70   #Max 100
+
+[tmc2660 stepper_y]
+cs_pin: PC9
+spi_bus: usart1
+run_current: 0.8
+sense_resistor: 0.051
+
+[stepper_z]
+step_pin: PD8
+dir_pin: PD13
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 0.5
+#endstop_pin: ^!PD29
+#endstop_pin: PD10  # E0 endstop
+#endstop_pin: PC16  # E1 endstop
+endstop_pin: probe:z_virtual_endstop
+#position_endstop: 0.5 #probe as endstop forbids this
+position_max: 130
+homing_speed: 5
+homing_retract_dist: 0
+
+[tmc2660 stepper_z]
+cs_pin: PC10
+spi_bus: usart1
+run_current: 1.2
+sense_resistor: 0.051
+
+[stepper_z1]
+step_pin: PD4
+dir_pin: !PD9
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 0.5
+
+[tmc2660 stepper_z1]
+cs_pin: PC25
+spi_bus: usart1
+run_current: 1.2
+sense_resistor: 0.051
+
+[extruder]
+step_pin: PD5
+dir_pin: PA1
+enable_pin: !PC6
+microsteps: 16
+rotation_distance: 4
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: !PA20
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC15
+#control: pid
+#pid_Kp: 15.992
+#pid_Ki: 0.638
+#pid_Kd: 100.153
+min_temp: 0
+max_temp: 270
+
+[tmc2660 extruder]
+cs_pin: PC17
+spi_bus: usart1
+run_current: 1.000
+sense_resistor: 0.051
+
+[heater_bed]
+heater_pin: !PA19
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC13
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[heater_fan hotend_fan] 
+pin: PC23  # FAN0 - hotend
+heater: extruder
+heater_temp: 50.0
+fan_speed: 1.0
+
+[fan]
+pin: PC26  # FAN1
+
+[heater_fan chamber_fan]
+pin: PA0  # FAN2 - chamber fan
+
+[force_move]
+enable_force_move: true
+
+[pause_resume]
+
+[exclude_object]
+
+[mcu scanner]
+serial: /dev/serial/by-id/usb-Cartographer_614e_2A003200104330394D363620-if00
+
+[scanner]
+mcu: scanner
+x_offset: 12
+y_offset: -41
+backlash_comp: 0.5
+sensor: cartographer
+sensor_alt: carto
+mesh_runs: 2
+
+[bed_mesh]
+horizontal_move_z: 5
+mesh_min: 20,15
+mesh_max: 200,90
+probe_count: 30, 30
+algorithm: bicubic
+bicubic_tension: 0.2
+zero_reference_position: 100,75
+speed: 200
+
+[temperature_sensor Cartographer_MCU]
+sensor_type: temperature_mcu
+sensor_mcu: scanner
+min_temp: 0
+max_temp: 105
+
+[safe_z_home]
+home_xy_position: 100,75
+z_hop: 10
+
+[z_tilt]
+z_positions: 
+    -55,75
+    240,75
+points: 
+    10,75
+    197,75
+retries: 5
+horizontal_move_z: 15
+retry_tolerance: 0.08
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [extruder]
+#*# control = pid
+#*# pid_kp = 15.992
+#*# pid_ki = 0.638
+#*# pid_kd = 100.153
+#*#
+#*# [scanner model default]
+#*# model_coef = 1.5917281060649031,
+#*# 	  1.9832262352679364,
+#*# 	  0.8501747732515245,
+#*# 	  0.4445393387890837,
+#*# 	  -0.09022803918332756,
+#*# 	  -0.11185295777977983,
+#*# 	  0.32820417396234064,
+#*# 	  0.10404937582185371,
+#*# 	  -0.1257683526163599,
+#*# 	  0.04266967924375816
+#*# model_domain = 3.3422980279672847e-07,3.375148362748417e-07
+#*# model_range = 0.100000,5.000000
+#*# model_temp = 28.108670
+#*# model_offset = 0.00000
+#*# model_mode = scan
+#*# model_fw_version = CARTOGRAPHER 5.1.0